返回首页 | 加入收藏 | 关于我们 | 联系我们

欢迎光临济南广大铝业有限公司官网!

铝板生产企业 铝卷良心厂家

全国服务热线131-5601-1888
133-2510-3098
济南广大铝业有限公司
当前位置:首页 » 济南铝板表面处理的方法有哪些?

济南铝板表面处理的方法有哪些?

文章出处:www.jngdly.com 责任编辑:admin 人气:270 发表时间:2023-01-09 14:50:35

使用的济南铝板铝材质量不是很好,里边夹杂杂质太多也会起皮,铝件进行抛丸处理后,在铝件上面的氧化层会被破坏了.无法处理的很干净,一部分氧化层还留在上面。对以上的问题目前没有行之有效的方法,可以了解基本的处理途径。
The use of Jinan aluminum aluminum quality is not very good, inside mixed impurities too much will play a skin, aluminum parts for shot blasting treatment, the oxide layer on the surface of the aluminum parts will be destroyed the. Unable to deal with the very clean, a partial oxidation layer still stays in the top. There is no effective way to deal with the above problems, we can understand the basic treatment.

1.进一步提高工件质量。To further improve the quality of the workpiece.

2.降低抛丸压力。Reducing blasting pressure.

3.对抛丸起皮部位进行打磨,如打磨后其底部问题,可重抛。The shot peeling parts such as grinding, polishing the bottom, to be thrown.

济南铝板 http://www.jngdly.com/厂家认为,抛丸是为了使工在件得到进一步的压实,通常每平方厘米受力为3千克力左右,如工件本身存在压铸质量问题,如气孔、气泡、冷隔等,在抛丸打实时就会产生起皮现象,这与压铸起皮非同一概念,要区分开来。
Jinan aluminum manufacturers believe that the shot is to enable industry and trade in a further compaction, usually per square centimeter stress is about 3 kg of force, such as workpiece itself die casting quality problems, such as porosity, bubble, cold partition. In the shot blasting play real-time will produce skin phenomenon, which skin and die casting non same concept to distinguish.

此文关键字:济南铝板