随着技术的提高，企业在铝卷加工的技术也提高了，铝卷是通过铸轧机经过压延而成，当我们在运输过程中，不可将铝卷和化工产品混合装置，并且要保证车厢的清洁干爽，做到无污染。
With the improvement of technology, enterprises in aluminum coil processing technology also improves, aluminum coil is made ??by casting machine after rolling, when we in the transport process, not the aluminum coil and chemicals mixing device, and to ensure car clean and dry, so no pollution.
　　
铝卷的最佳运输方式可以采用封闭式车厢或者船舱等方式进行运输，也可以用敞车装运，在运输的时候需要注意检查货物是否捆绑牢固，做好防水防潮等措施，确保车厢内雨水都进不来。当货物需要取下时，应该存放在仓库内，如果是存在露天的库房那么就要做好一系列的防护措施了，同时我们在装卸的时候要轻拿轻放，以免损坏包装箱中铝卷。
Aluminum coil best mode of transport and other enclosed compartment can be used for transportation or cabin way, you can also use gondola shipment in transit when the need to pay attention to check whether the bundle of goods firm, good waterproof and other measures to ensure that rainwater went into the compartment do not come. When the need to remove the goods, should be stored in the warehouse, if the existence of the open-air warehouse then they would do a series of protective measures, and while we are loading and unloading time to gently, so as not to damage the aluminum coil box .

在铝卷搬运过程中,小心保护同时必须正确掌握搬运和存放的方法,注意边角的保护,铝卷理想的停放是在平整的场地,搬运过程中应面与面叠搬运,禁止单人搬运.注意边角保护.避免在搬运的过程中出现摩擦,影响铝卷的外表,从而影响装饰效果。储存的场所要保持通风和干燥,不要放在潮湿,阴暗的场所.如果是放置在露天的情况下,应将其盖住,避免雨雪天气,遭受腐蚀，储存于通风、干燥处,避免日光直射。
In the aluminum coil handling process, be careful to protect simultaneously handling and storage methods must correctly grasp the attention corner protection, aluminum coil ideal venue parked in formation, handling process should be stacked surface and surface transportation, prohibit single person handling Note corner protection. avoid friction in the process of handling, the impact of the appearance of aluminum coil, thus affecting the decorative effect. Storage place to keep ventilation and dry, not on a wet, dark place. If this is the case is placed in the open air, it should be covered to prevent rain and snow from corrosion, stored in ventilated, dry place, avoid sunlight direct.
 

济南铝卷：http://www.jngdly.com/